Thank you for choosing IJOY! Read this guide to ensure proper usage. For more information about this product or its use, contact your dealer or visit our local website IJOY 

Presentation of products:

CAPO IJOY Squonk  VEIIK Airo Replacement Pod  mod box 216 is the first and smallest double box Squonk 20700 mod! Long battery life, stylish, personal shot button and battery cover with custom design practical key controls, large screen and high-power OLED 5-216W personal, simple and safe operation. RDA is suitable for large diameter with USB support for fast charging. Adopting the combination of transparent silicone + ABS special bottle of hard and soft organic Squonk, effectively preventing the accidental release of the compression demolition! Users can also use the adapter 18650-18650.


1 * 216 IJOY CAPO Squonk BOX MOD

1 * Warranty Card

1 * USB Cable

1 User


• Screen size: 0.66 "0LED.

• Size: 45 * S * 83.S /1.78*3.29*2.0 1.25 inches.

• Output Power: 5Watts-216watts

• Output Voltage: O.SVolts-8.0Volts.

• Output Current: 1.0A-36A.

• Temperature: 300-600'F / s 150-31 "C. Smok Vape Pen 22 Replacement

mode power cables • Control Resistance Range: 0.06ohm-3.0ohm 

• Energy efficiency: 95%.

• Methods of Fire: stainless steel metal button drawing.

• Establish a method of feeding: and button down.

• Firmware Update: Yes. Kangvape Slick Plus Disposable

• Output Mode: / IT / VW manual mode Ni / SS special

• types of cells:

20,700 high-speed cell (discharge current should be greater than 40A) high speed 18,650 cells with the help of the battery sleeve (discharge time should be greater than 35A)

Operating instructions:

1. lnstalling Battery

Open the battery cover, insert two 20700 batteries into the battery compartment, please pay attention to the positive aspects and the negative electrode. You can also use the cover 18650.

2. On / Off

Press the shutter button 5 times quickly to turn the unit on and off. After ignition, uoy OLED logo and the software version number in the standby mode

Vaporesso Renova Zero 


Please adjust the power in the correct range for the game that used the spray before use.

When a new atomizer connected, please press and the "+" - key for the initial value of the resistance temperature calibration) »»

3. vaping

While the power is on, just keep pressing the shutter button from the vaporizer

(Start time: 10 seconds)

While the power is on, the default display mode OLED VW. EGO-C Twist Vape 

4. menu

Press the shutter button three times within 2 seconds to enter the device menu, and then go to the menu operation, the +/- buttons do not move the shutter menu button to confirm.

5. How Temp Ni / Ti / SS

1. Temperature control mode information display (labor, resistance, voltage, operating temperature, and battery power)

2. Press the + and - buttons to increase or decrease the shutter button to confirm, then you can move to adjust the temperature or power.

6. VWMode

a predetermined power is 85 W output power can be adjusted from 5W-216W pressing Control +: to increase and decrease.

7. Mode Settings

In entering this mode, the control / display standard temperature management mode hard / soft:

• Normal mode: This is the power that now has before

• Mode difficult: Powerful + 30% before establishing his rule.

• The gentle mode: 20% power setting before power. Uwell Caliburn KOKO 

CEPA creation?

From the main menu, go to viewing mode "CRT", press the button to confirm the fire. Press left / right to select certain parameters.

How to identify new and the same coil

How interesting and reinstall the tank temperature control, please press the0-0button to confirm (the same coil) if the coil is used, please press The0 + "to confirm (new coil) if a new coil.

8. Charging via USB?

When the voltage is less than 3.3 V, the display shows "low battery", then you need to charge your device, connect the device to a computer via USB or AC adapter cable. You can not vape for chargin

Click Here